June AQS & AccuQuilt Along: Warm Wishes Wall Hanging

It's time for our next quilt along! Watch the AccuQuilt Live Facebook event each week on Wednesdays at 12 pm CDT, at the AQS Quilting Project Parade Facebook Group for tips and step-by-step instructions.

Click here to join our Facebook group.

In June, we made the Warm Wishes Wall Hanging.

Designed for AccuQuilt by Amanda Harward of Larkspur Quilts

Finished Quilt Size: 40" x 40"

Download the GO! Warm Wishes Wall Hanging pattern here.

Download the Teapot templates here.

Download the Teacup templates here.

The Warm Wishes Wall Hanging features classic Broken Dishes blocks combined with teacup and teapot appliques to create a fun and whimsical feel-good project.

Traditional rotary cutting directions are provided below. 

Fabric Requirements

White: 1 3/4 yards
Dark Blue: 1 yard
Brown: 1/2 yard
Light Blue: 1/8 yard
Tan: Scraps
Orange: Scraps
Batting: 45" x 45"
Backing: 47" x 47"
Fusible: 1 1/4 yards

Cutting Instructions

*You may want to wait to cut the template shapes until you've selected your preferred applique technique. You may also find it helpful to oversize your background squares for the applique blocks and trim them to size after the appliques are complete.

From the White:

• (16) 8 1/2" x 8 1/2" squares
• (72) 2 7/8" x 2 7/8" squares; cut each square diagonally once to make 144 triangles

From the Dark Blue:

• (72) 2 7/8" x 2 7/8" squares; cut each square diagonally once to make 144 triangles
• (8) Teapots*
• (8) Saucers*

From the Brown:

• (4) 2 1/2" x WOF strips for the Binding
• (8) Teapot Lids*

From the Light Blue:

• (8) Teacups*

From the Tan:

• (8) Tea Bags*

Week One

Pour a cup of tea and get ready because it’s time to cut out the pieces for our new quilt-along for the Warm Wishes Wall Hanging by Amanda Harward of Larkspur Quilts.

If you would like to use AccuQuilt dies to cut out your quilt, you'll see the pattern calls for the GO! Half Square Triangle-2” Finished Square Multiples (55063), but did you know that shape appears on other dies as well? It can also be found on the GO! Value Die (55018) and in the GO! Qube Mix & Match both 4” and 8” Finished Blocks. It will be Shape 3 in the 4” and Shape 5 in the 8”. It doesn’t matter which one you use, however your fabric prep directions will vary by the die you are using. Visit the AccuQuilt blog to learn more about preparing your fabrics for cutting with dies.

However you decide to cut your pattern, here are the basics you’ll want to gather up:

• Free, downloadable pattern for assembly directions and fabric requirements
• Rotary cutting mat, rotary cutter and an acrylic quilting ruler
• Fabric
• Iron-on fusible.

So, grab your pattern and let’s get started.

Preparing Your Applique Fabrics

Next up, we need to cut out the applique shapes. Whether you are cutting shapes with GO! dies or the free, downloadable templates above, you will want to prepare your fabric before cutting your shapes out by pressing a lightweight fusible product onto the wrong side of your fabric.

When cutting your shapes, keep in mind that both the teacup and the teapot are directional, so be sure you have your handles and spouts facing the way you want!

Week Two

With our pieces cut and ready, it’s time to start creating the pieced and applique blocks.

This week, we’re going to be making the Broken Dishes blocks that make up the border for this
project. This block is fantastic for chain piecing. Start by sewing your dark and light half square triangles together and pressing them to the dark side.

Next, lay out the blocks checking that all the units have the correct orientation, then sew the units into pairs pressing to the dark side. This helps to nest your units together to
form blocks with picture-perfect points in the middle. 

Once the block is completed, turn it over so the wrong side of the block is facing up. Remove a stitch or two from the seam allowance at the center of the block, open the center and press the seams on either side of it in opposite directions. This will help reduce the bulk. You’ll know you have it right when you see a tiny 4-patch in the center.

Last week, when we cut our applique shapes we ironed fusible onto the back of the fabric
before cutting, which means we are all ready to get started. You’ll need an iron and ironing
board or mat for this step, and your first decision is how you plan to finish the edges of your
shapes.

Visit the AccuQuilt blog to learn how Pam and Erica are appliqueing their shapes. Pick your favorite method.

Week Three

It's time to assemble the quilt! Don't miss today's Facebook live with Erica and Pam as they share tips and tricks for bringing it all together.

Week Four

Grab a cup of coffee with Pam & Erica as they show off the quilts shared by quilters participating in the quilt-along. Tune in to see all the inspirational pictures from this project and see if you spot a picture of your creation as well!

You can watch at 12 p.m. CT on Facebook in the AQS Quilting Project Parade Facebook Group or on AccuQuilt's Facebook page.

We've also included the Show & Tell quilts below. Scroll and enjoy!

Schedule

Week One: Wednesday, June 5, 2024 - Cut and organize

Week Two: Wednesday, June 12, 2024 - Sewing blocks and applique techniques

Week Three: Wednesday, June 19, 2024 - Quilt top assembly

Week Four: Wednesday, June 26, 2024 - Show & Tell

Join the Fun

Be sure to join in the fun on the AQS Quilting Project Parade Facebook Group where you'll meet quilters like you participating in the quilt along. Everyone is happy to help each other, so don't be shy, ask your questions and share your progress.

Click here to join our Facebook group.

If you've missed our previous AQS & AccuQuilt-Alongs, check them out!

February 2023 - Stars in the Crown Quilt Along

April 2023 - Scrappy Star Log Cabin Quilt Along

June 2023 - Morning Star Rainbow Quilt Along

August 2023 - Shoo Fly Spin Quilt Along

October 2023 - Dart Around Glorified Nine Patch Quilt Along

February 2024 - Grapefruit Slice Throw Quilt Along

April 2024 - Simply Cubed Throw Quilt Along